It cost about $800 to $1000 to do this; including parts and labor. Click on a Picture to enlarge.
| Installation Description |
Tiger N505
|
Tiger N9242Z
|
Cheetah N6299U
|
| N8571V: Here is the splitter I made for my Citabria between the #4 cylinder and the oil cooler. The combination of this and a Stewart-Warner 8406R oil cooler dropped the oil temp by 15 degrees F. Most planes I see: The bolts are installed backward. The nust are supposed to be tightened. Installed this way, the nuts would be a pain in the ass to tighten. |
 |
 |
 |