I've heard a lot of, "That's just too expensive for a $50,000 Tiger."  Maybe.  The last I heard, FletchAir was selling "HALF" of an upper cowling for $800.  They also sell one-half of the elevator for $2500.  A baffle kit from AirForms is $1500.  This is a completely new cowling (albeit, one that will still need to be installed) WITH all new baffles, for under $10,000.  If you've ever wanted to build your own plane, here is a good place to start.
----->  You can order your Jaguar Cowling in one of two ways.

Note: The Jaguar Cowling requires a Power Flow Exhaust System.  I can get you a PFS at a smokin' deal.

The list prices shown below are effective 1 January 2020.       Call for current price discounts and specials.  (530) 613-6488

1. Basic Jaguar Cowling:

This Jaguar Cowling comes to you fresh from the tooling.  It is drilled and Cleco'd together.  It also comes with a complete, new, set of baffles and installation instructions.  You will need to fit, drill for mounting screws, install the centerline hinge, paint the inside of the cowling in a white polyurethane paint, paint the outside of the cowling to match your plane, install the baffles and baffle seals, put it together and go fly.  Figure about 60-100 hours of your time.

Note:  I've been told that fitting and installing the cowling can take as little as a week and as long as a couple of months to fit and install the cowling (not including the baffles.)  A lot depends on the experience of the installer.

What you will get in your kit:

• Both lower cowling halves and an (un-cut) upper cowling. 
• A new centerline hinge that is ready to install (a $400+ value).
ALL NEW BAFFLES, custom fitted, alodined, and ready to powder coat (an $1100+ value)

What you will need:

• Baffle seal material. I use the 3/32 inch seal from Aircraft Spruce PN: 06-02461 
• CamLoc (10 each): 4002 Receptacles (214-16ND), Snap rings (R4G), Flush Grommet (4002-GS), Studs (40S5-4S)
• Misc nutplates, rivets, screws, Bondo, primer and paint


Plus Shipping


Plus Shipping


2. Ready to fly Jaguar Cowling:

Drop off your plane at AuCountry Aviation in (beautiful) Auburn, California and pick it up in when it's done.

Includes:  All of the above plus the baffles and baffle seals installed, all of the final fitting and detailing completed, Cam-Locs and centerline hinge installed. I estimate my time at about 60 hours for fitting the cowling and installing the baffles.

Note: "Does not include painting the outside of the cowling.   Final surface prep and paint is cheaper at a paint shop.



A minimum deposit of $5,000.00 is required on all orders. 
Final payment is due before completion of the order.
Shipping costs are additional and based on actual shipping charges.
Taxes apply to all California purchases.

NOTE: Cowlings ordered by credit card will be charged a 3% handling fee.