Headliner     - - - >  Back to "Restoration" page

Headliner the AuCountry way.    After the old headliner is removed, I fill the channels and center with foam and then cover the whole surface with a high density foam 1/8 inches thick.  The material goes on top of that.
Two beginning pics:
Latch cover:
Completed:
Rear installation:		 Wall-to-wall headliner.
Note the channel on the right
After the trim is installed
I really hate the rivets		 Corner detail:
Felt chafe strip:
Cabin light:

I trim the corner to fit w/o the center section
No more funky plastic sticky vinyl bead
Two lights.  No more plastic.

..