Headliner     - - - >  Back to "Restoration" page

After the entire surface is cleaned, I apply contact cement on both surfaces (the felt comes as self sticky) and glue the felt down.  I've tried a nubmer of ways to glue the felt down.  Sometimes they come loose, somtimes they stick..
Two beginning pics:
Latch cover:
Completed:
Rear installation:		 Wall-to-wall headliner.
Note the channel on the right
After the trim is installed
I really hate the rivets		 Corner detail:
Felt chafe strip:
Cabin light:

I trim the corner to fit w/o the center section
No more funky plastic sticky vinyl bead
Two lights.  No more plastic.