Navigation Note:  Click a button (in the panel on the left) to navigate to somewhere else.

. . . .This is what the EI wires looked like on the outside before I removed themI chose to run the wires though the hole used by the tach cable.  This plane got a Horizon P-1000 digital tack too.

EI Unit:
EI wires (01):
EI wires (02):
EI Firewall side:
w/ ONLY the EGT and CHT wires
This is under the panel
This is also under the panel
EI wires before being tied together
JPI Unit:
JPI Wires:
JPI Firewall side:
Top View:

w/ CHT, EGT, Fuel Flow and GPS data wires
The yellow cable is almost all of the wiring for the JPI
This is on the outside.
Another view on the outside.

Click the Picture below to return to the "Restoration Page"